1.A connecting website link of an O-ring Chain for basic application is pre-coated with grease at the pins. Ahead of connection, verify the grease on the surfaces of pins, and if the quantity of grease is modest, apply grease with bare hands. (If gloves are utilised, the grease will be absorbed by the gloves.)
Example: Once the connecting link (I) of an O-ring chain for standard application is
shipped, O-rings are fitted at the roots with the pins. Should the O-rings come loose because of vibration in the course of transport, refit the O-rings in towards the roots of your pins.
In this instance, you’ll want to return the grease collected on the roots of your pins for the central surfaces in the pins, far more at portion A than at portions B shown while in the above illustration. (Portions A is worn on account of sliding together with the bushings.)
two.The chain might be most easily linked around the teeth of the sprocket. Engage the back links at the two ends of the chain together with the sprocket teeth and match connecting pins. Should the sprocket may be moved, the chain may also be linked about the loosened side.
3. Connecting method
1.Verify that O-rings are connected for the roots with the pins.
2.In case the amount of grease utilized to the connecting pins is smaller, coat the pins with grease at the central portions.
three.Insert the connecting pins in to the bushings with the inner hyperlinks at each ends.
4.Verify the grease is utilized towards the whole encounter with the O-ring, and match the O-ring onto the connecting pins.
5.Insert the connecting pins in to the connecting plate and though pressing the connecting plate, install the spring clip. Verify no matter whether the head (the end with no split) of the spring clip is turned in the feeding direction of the chain. (See the next illustration.)
six.You should definitely confirm the spring clip is securely fitted from the clip grooves of the connecting pins.
This completes jointing of the connecting link. Note that grease over the surfaces of connecting pins and O-rings could be eliminated for the duration of installation do the job. In this instance, re-grease making use of the grease over the surface of the base chain or the grease inside the polyethylene bag through which the connecting link was contained.