Why Coupling Grease?
Sufficient lubrication is vital for satisfactory gear coupling operation. Gear Coupling Grease is especially intended for gear coupling applications to increase coupling life when dramatically decreasing servicing time. Its substantial viscosity base oil and tackifier combine to maintain the grease in location and avert separation and it truly is in full compliance with NSI/AGMA 9001-B97 lubrication suggestions.
Coupling Grease is dark brown in color and manufactured using a lithium soap/polymer thickener, which has superior resistance to oil separation when subjected to substantial centrifugal forces usually discovered in couplings. Bearing or basic goal greases are inclined to separate and drop effectiveness as a consequence of higher centrifugal forces on the several components at large rotational speeds. These substantial centrifugal forces encountered in couplings separate the base oil in the thickeners. Hefty thickeners, which have no lubrication attributes, accumulate from the gear tooth mesh location leading to premature coupling failure. Gear Coupling Grease is designed to highly resistant to centrifugal separation with the oil and thickener, which will allow the lubricant to be utilised for a reasonably long period of time.
On the list of tricks on the good results of Gear Coupling Grease is definitely the variable consistency through the entire doing work cycle with the application. The consistency of our gear coupling grease improvements together with the working conditions. Operating with the lubricant underneath real service problems leads to the grease to become semi-fluid, functionally solash lubricating the wear surfaces with the coupling. Since the grease cools, it returns to the authentic consistency, thereby avoiding leakage.
Gear Coupling Grease is accessible from stock in 14 oz. cartridges, one lb. and five lb. cans.
Capabilities
Minimizing of coupling put on
Resistance to water washing
Corrosion and rust safety
Large load carrying capabilities
Extended relubrication frequency
Use at temperatures 
as much as 325° F
Staying in spot underneath large speeds
Resistance to centrifugal separation
Reduction in down time & servicing cost
Gear Coupling Grease has a consistency which overlaps the NLGI grades 0 and one. This grease is specially formulated with a lithium/polymer thickener and fortified with corrosion, oxidation, extreme pressure, and a effective rust inhibitor additive package.
